Easy to install, crimped curved sheets provide versatility and creativity that bring new and refreshing design to industrial and domestic buildings. The combination curves and contours in concave and convex shapes with flats and angles can be used to add an aesthetic appeal to the building.
Crimped sheets provides absolute design freedom with significant cost saving in construction. This is possible because:
Supply ofColor coated Galvalume Profiled sheet, 0.50mm (TCT) THICKNESS, Profiled with the depth of 28 mm-32mm pitch of 250 mm. Covered width 1020mm and overall width of 1075 mm Material Yield Strength is 550 MPa, 150 GSM Galvalume AZ- 150 (min.150 gsm Zinc Aluminium Alloy coating mass total of both side) and coating of 20-25 micron RMP on exposed surface including Primer and 7-10 micron epoxy coating on un-exposed surface including Primer.
Curved Roofing & Cladding the minimum radius of curvature for either concave convex curving is 550 mm to inside of sheet. Minimum length of sheet at either end of a curve is 180 mm at leading end and 200 mm at the lagging end. Maximum recommended radius for crimp
Supply of Color coated Galvanized sheet0.50mm thickness, Profiled with the depth of 28 mm-32mm pitch of 250 mm. Covered width 1000mm and overall width of 1065 mm .Strength of 240 MPA, 120 GSM Galvanized and coating of 25 micron RMP on exposed surface including Primer and 7-10 micron epoxy coating on un-exposed surface including Primer.
Precoated roofing sheets are available in: